An Energy Storage System Integrator Offering

An Energy Storage System Integrator Offering

HomeNewsnews

Sungrow PowerHarbour Pro: EV Charger In, V2X Still to Come

Date: 2026.11.20   Views: 31

2000W pure sine wave inverter

Sungrow’s PowerHarbour Pro packs an inverter, a battery and a built-in EV charger into one box — but its headline V2X feature is still only designed for the future. With Australian certification pending, it cannot be installed until the first quarter of 2027, and no price has been published.

It made its Australian debut at All-Energy Australia 2026 in Melbourne on 28–29 October 2026, reported by pv magazine Australia on 2 November 2026, with a PR Newswire release the same day. It is an all-in-one home storage system — inverter, battery modules, energy management and, in the Pro version, an AC EV charger — in a single package. For a household with solar and an EV, that is a tidy combination. The catch is timing: the most talked-about part, letting the car send power back to the home, is not something buyers can use yet.

What the PowerHarbour Pro Packs

Power runs from 10kW to 30kW: single-phase inverters at 5, 8 or 10kW, three-phase systems up to 30kW. Battery modules come in 7kWh and 10kWh sizes and can be mixed; one stack holds up to six modules for 60kWh, and a second stack in parallel takes the system to 120kWh. The 314Ah lithium iron phosphate cells are rated for up to 10,000 cycles under a 90% depth-of-discharge test condition, and the inverter and battery units are IP66 rated for −20°C to 50°C operation.

Two details matter. First, solar charges the battery at up to 1.6 times the standard rate — a charging speed figure, not a claim that the panels generate more electricity. Second, the companion EnergyBridge backup unit bundles the transfer switch, breakers, meter, bypass switch and current transformers into one box Sungrow says is 99% smaller than a traditional backup gateway and can cut installation time by up to one hour — both maker claims, not independently tested figures. Monitoring runs through iSolarCloud.

Inverter in home storage use

The EV Charger Is In — V2X Is Not

The Pro version’s built-in AC EV charger delivers 7kW per phase, so the car charges from the same box that stores the home’s solar power. That is the real, working feature today. What the charger does not do yet is run in reverse: Sungrow says it is designed for future V2X applications, and that V2X itself “still depends on market availability and compatibility.” The hardware is ready for a feature with no launch date, no published list of compatible cars, and no confirmed market.

V2L, V2H and V2G are three different things — powering devices, backing up the home, and feeding the grid — and this system does none of them today. The 7kW-per-phase figure is a charging rate, not a reverse-power figure. Until Sungrow names a date and compatible vehicles, V2X here means “planned, not available.”

A standard version, PowerHarbour, has no integrated EV charger: the charger is a Pro-version feature, and buyers who want it need the Pro model.

Not on Sale Yet in Australia

Even the finished parts cannot be bought in Australia yet. The system is still waiting on Clean Energy Council (CEC) approval, and Sungrow expects installation only in the first quarter of 2027; in the Australian product demonstration the SHSA-Pro model is marked “coming soon.” No price has been published, and there is no announced date for other markets either.

So the specifications are public, the launch event has happened, and the product is still months away from a rooftop. Households planning a system now must decide whether to wait for it — and for V2X on top of it — or to solve the power problem they have today with equipment already on the shelf.

Car inverter powering camping gear at a campsite

While You Wait: Size a Standalone Inverter

A fixed home storage system fits the job of storing solar power for the whole house. But many power needs are smaller, mobile, or immediate: a fridge and lights during an outage, tools at a worksite, a laptop and coffee maker from the car at home. For those jobs, a standalone pure sine wave inverter — sized to the load, not to the house — is already available, and it works with the car, van or RV you already own.

Size it by the load: add up the rated watts of the devices you will run together, leave headroom for surges, and pick the next size up. Sunrise New Energy (Powsmart) builds REP pure sine wave inverters from 300W to 5000W in 12V, 24V and 48V versions. A mid-size household load calls for the 3000W pure sine wave inverter: rated 3000W with a 6000W peak, pure sine wave output with total harmonic distortion below 3% under linear load. It runs a fridge, TV, lights and laptop together, or a 1000–1200W microwave, in 12V, 24V or 48V. Check the manual for wire size and fuse ratings; those depend on battery voltage and cable length. See the full REP pure sine wave inverter series to match a model to your load.

  PowerHarbour Pro (Sungrow) Standalone REP3000 inverter
What it is All-in-one home storage EV charger Portable DC-to-AC inverter
Power 10–30kW system, up to 120kWh storage 3000W rated, 6000W peak
EV charging 7kW per phase built in (Pro) Powers AC devices, not an EV charger
V2X Designed for the future, not available Not applicable
Availability Australia: CEC pending, Q1 2027 Available now, any car, van or RV

Against the BLUETTI Apex 200 (31 October), the angle differs: expansion locked to the maker’s own batteries there, a charger built in and V2X still to come here. Against the Germany V2H policy piece (1 November), it is a product launch against a policy change — German rules made vehicle-to-home economics work on paper, while this is the hardware that would have to deliver it, and it is not on sale yet.

FAQ

When can I buy the Sungrow PowerHarbour Pro in Australia?

Not yet. Clean Energy Council approval is pending, and Sungrow expects installation in the first quarter of 2027. No price has been published.

Does the PowerHarbour Pro do V2X now?

No. The built-in charger is designed for future V2X, but Sungrow says the feature still depends on market availability and compatibility — no date or compatible-car list has been published.

How big can the system get?

Power from 10kW to 30kW, with mixable 7kWh and 10kWh modules. One stack reaches 60kWh; a second in parallel takes it to 120kWh.

Does it include an EV charger, or do I need a separate one?

The Pro version has a 7kW-per-phase AC charger built in. The standard PowerHarbour does not — the charger is Pro-only.

My car or home needs power now. What can I use today?

A standalone pure sine wave inverter sized to your load. For a mid-size household load, the REP3000 (rated 3000W, 6000W peak) covers a fridge, TV, lights and laptop together.

3000W pure sine wave inverter

Sources: pv magazine Australia, 2 November 2026 (debut, specs, V2X depends on market availability and compatibility, CEC pending, Q1 2027 installation); PR Newswire, 2 November 2026 (All-Energy Australia 2026, Melbourne, 28–29 October 2026).

Tell us what you need to power — home backup, camping gear, or work tools — and Sunrise New Energy (Powsmart) will help you pick the right size.

We value your privacy

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies.

Consent Preferences

Consent Preferences